Charlotte, NC only · Commercial doors · Phone only, no formsCall (984) 367-2696
Commercial Doors Charlotte: storefront and entrance systems Commercial doors, Charlotte(984) 367-2696

Charlotte, NC · Storefront & entrance systems

Commercial Door Repair and Service in Charlotte, NC

We keep Charlotte's commercial doors working: storefront and automatic entrances, the closers, pivots, locks and panic bars on them, steel and fire-rated doors, and the overhead doors at the dock. One city, commercial doors only, and the fastest way to get a door fixed is a phone call.

Call about a commercial door(984) 367-2696

Calls only. No forms, no waiting on an email.

  • Charlotte, NC only
  • Storefront, steel, fire and dock doors
  • No forms. Talk to a person.
Technician in a white hard hat measuring a glazed door frame with a tape measure and marking it with a red pencil
Measuring before any part is ordered: clearances, hardware locations and the opening itself.

Entrance Spot Check

Where on the door is the problem?

Drawing of an aluminum storefront door with numbered parts 1 header and automatic operator, 2 door closer, 3 top pivot or hinges, 4 glass and door leaf, 5 lock and cylinder, 6 push bar or exit device, 7 push button and opening force, 8 threshold and weatherstrip. 12345678
Pick the numbered spot that matches what you are seeing. The answer shows what usually causes it, how urgent it is and which repair it needs.

Pick a numbered spot on the door or in the list to see what it usually means.

Urgent Urgent. Call now.

1. Header and automatic operator

What it usually means: An activation or safety sensor, or the operator in the header, has failed or drifted out of adjustment.

Automatic Door Repair in Charlotte →

Call now(984) 367-2696

Today Call today.

2. Door closer

What it usually means: The closer is out of adjustment, or leaking and no longer controlling the door.

Commercial Door Closer Repair in Charlotte →

Call about door closers(984) 367-2696

Today Call today.

3. Top pivot or hinges

What it usually means: The pivot or hinges carrying the door's weight are worn or torn loose.

Door Pivot and Hinge Repair in Charlotte →

Call about pivots & hinges(984) 367-2696

Urgent Urgent. Call now.

4. Glass and door leaf

What it usually means: Impact, failed glazing stops, or loose corner joints in the stiles and rails.

Storefront Door Repair in Charlotte →

Call now(984) 367-2696

Urgent Urgent. Call now.

5. Lock and cylinder

What it usually means: The bolt is missing its strike because the door has dropped, or the cylinder is worn.

Commercial Door Lock Repair in Charlotte →

Call now(984) 367-2696

Urgent Urgent. Call now.

6. Push bar or exit device

What it usually means: A worn latch, a bent rod, or a door that is out of line with its strike.

Panic Bar and Exit Device Repair in Charlotte →

Call now(984) 367-2696

Today Call today.

7. Push button and opening force

What it usually means: A closer set too strong, a dragging door, or an actuator or opener fault.

ADA Door Opener Installation in Charlotte →

Call about ada door openers(984) 367-2696

This week Book it this week.

8. Threshold and weatherstrip

What it usually means: Worn seals, or a door that no longer sits square in its frame.

Storefront Door Repair in Charlotte →

Call about storefront doors(984) 367-2696

Overhead, dock or roll-up door instead? Commercial overhead door repair

Door systems

Five commercial door systems, side by side

Each kind of commercial door wears out in its own way and answers to its own rules. Find yours, see what usually fails first, and open the repair page.

Five commercial door systems, side by side in Charlotte, NC
Door systemWhere you find it in CharlotteWhat wears firstRules that applyRepair page
Aluminum storefront doorsShops, restaurants and lobbies in South End, NoDa and SouthParkTop pivots, corner joints, closers, weatherstripAccessible opening force and closing speedStorefront Door Repair
Automatic entrancesGrocery, pharmacy, clinic and hotel entrancesSensors, drive belts, carrier wheels, controllersANSI/BHMA A156.10 and A156.19Automatic Door Repair
Hollow metal steel doorsBack doors, stairwells and warehouse man doorsHinges, bottom edges, frames at the floor, latchesFire label on rated openingsHollow Metal Door Repair
Fire-rated door assembliesStairwells, corridors, utility and electrical roomsClosers, latching, clearances, labelsNFPA 80 annual inspectionFire Door Repair
Overhead and rolling doorsDocks and service bays in Steele Creek and along Westinghouse BoulevardSprings, cables, rollers, seals, openersOpener safety sensors and the manufacturer's limitsCommercial Overhead Door Repair
Technician in a white hard hat and safety glasses holding a yellow spirit level against the aluminum frame of a glass storefront
Checking an aluminum storefront frame for plumb. A door can only hang true in a frame that is square.

Storefront and entrance systems first

Most Charlotte businesses are judged by their front door. An entrance that drags, slams, will not lock or will not open for a wheelchair costs customers every day it is left. That is why this service starts at the entrance: the aluminum storefront door, its pivots and closer, the lock and exit device, and the push-button opener beside it.

Behind the front door are the steel and fire-rated doors that keep a building safe, and the overhead doors that keep it supplied. All of them are covered here, for Charlotte only.

Call about an entrance door(984) 367-2696

What we work on

Commercial door services in Charlotte

Pick the door or the part that is failing. Each page explains the signs, how urgent they are, what gets checked and what a proper repair involves.

How a call works

From the phone call to a door that works

  1. Call and describe the door

    Say what kind of door it is, what it is doing and whether the building is secure. A two-minute call is usually enough to know what is involved.

  2. Secure it if it cannot wait

    Doors that will not lock, will not open from inside or are hanging dangerously are made safe first.

  3. Fix the cause

    Door, frame and hardware work as one assembly. The part that failed is repaired along with whatever made it fail.

  4. Test it the way you use it

    The door is opened, closed, latched and locked the way your staff and customers use it before the job is called finished.

Measured before anything is ordered

Commercial door parts are specific: pivot offsets, closer sizes, lock backsets, exit device lengths, fire ratings. Measuring the door, the frame and the hardware before ordering means the right part arrives the first time, and the door is fixed in as few visits as possible.

Call to book a visit(984) 367-2696
Technician in a white hard hat measuring a glazed door frame with a tape measure and marking it with a red pencil
Measuring before any part is ordered: clearances, hardware locations and the opening itself.

Charlotte only

Built around Charlotte's commercial buildings

This service covers Charlotte, North Carolina, and nowhere else. These are the buildings and the weather that shape the door problems we see most.

Retail and restaurant storefronts

South End, NoDa, Plaza Midwood, Elizabeth and SouthPark: aluminum and glass entrances opened hundreds of times a day, plus steel service doors at the back.

Office towers and suites

Uptown, Midtown, Ballantyne and SouthPark: lobby entrances, automatic doors, stairwell fire doors and suite locks that change with every tenant.

Medical, school and church buildings

Across the city: accessible entrances with push-button openers, exit devices that must release every time, and fire doors that are inspected every year.

Warehouses and service buildings

Steele Creek, Westinghouse Boulevard, North Graham Street and the airport area: dock and roll-up doors and the steel man doors beside them.

What Charlotte weather does to doors

  • Summer heat Closer fluid thins in the heat, so doors set in spring start to slam by July. Sun-facing aluminum frames move enough to make doors bind.
  • Afternoon thunderstorms Gusts catch open doors and throw them against their stops, bending closer arms and loosening pivots and corner joints.
  • Pollen and construction dust Grit packs into thresholds, floor closers, sliding-door tracks and sensor lenses across a city that is always building.
  • Humidity and rain Steel doors rust from the bottom edge up, and worn weatherstrip lets water in at the threshold.
Row of ten numbered white sectional overhead doors with dock levelers along a grey distribution warehouse
A row of dock doors on a distribution building. When one stops, so does that bay.

Charlotte neighborhoods we work in

  • Uptown
  • South End
  • Midtown
  • NoDa
  • Plaza Midwood
  • Dilworth
  • Elizabeth
  • Myers Park
  • SouthPark
  • Cotswold
  • Ballantyne
  • University City
  • Steele Creek
  • Northlake
  • Camp North End
  • Optimist Park
  • Wesley Heights
  • FreeMoreWest
  • Sedgefield
  • Montford

Including businesses along North Tryon Street, South Boulevard, Central Avenue, Wilkinson Boulevard, Westinghouse Boulevard, Independence Boulevard, North Graham Street, Statesville Avenue, the I-85 and I-77 corridors and the airport logistics area around CLT.

Straight answers

Repair or replace? A straight rule of thumb

Usually repair

  • The door leaf is straight and the corners are tight
  • The failure is hardware: pivot, hinge, closer, lock, exit device or seal
  • The frame is plumb and well anchored
  • Parts are still made for the door and its hardware

Consider replacing

  • The door is rusted through, badly bent or forced
  • Corners or welds keep failing after repair
  • The frame is corroded or pulling out of the wall
  • The opening needs a different fire rating or hardware function

Most commercial door calls end in a repair. When replacement makes more sense, you will be shown why before anything is ordered.

FAQ

Questions Charlotte businesses ask

Do you only serve Charlotte?

Yes. This service covers businesses in Charlotte, North Carolina only, from Uptown and South End to University City, Steele Creek and Ballantyne. One city keeps the focus where it belongs.

What commercial doors do you work on?

Aluminum storefront and glass entrances, automatic sliding and swing doors, push-button ADA openers, closers, pivots and hinges, panic bars and exit devices, commercial locks, hollow metal steel doors and frames, fire-rated doors, and overhead, dock and roll-up doors.

Why is there no contact form?

A door problem is quicker to sort out on the phone. Two minutes of questions about the door, the hardware and whether the building is secure gets you a straight answer faster than an email.

Can you give me a price over the phone?

You can get an honest idea of what is involved and what drives the cost. A firm price depends on seeing the door, because the part that failed often has a cause behind it.

Do you install new doors as well as repair them?

Yes. When a door is past repair, a replacement is fitted, usually on the existing frame, along with the closer, lock and exit hardware it needs.

Do you repair fire doors that failed inspection?

Yes. Fire door deficiencies are repaired with parts that keep the rating, and you get a door-by-door record of the work.

What should I have ready when I call?

The address in Charlotte, the door type, what it is doing, when it started and whether the building can be secured. A brand name on the closer, lock or operator helps.

Commercial door problem in Charlotte?

Tell us the door and what it is doing. That is all it takes to get started.

Call now(984) 367-2696
Call (984) 367-2696