Charlotte, NC only · Commercial doors · Phone only, no formsCall (984) 367-2696
Commercial Doors Charlotte: storefront and entrance systems Commercial doors, Charlotte(984) 367-2696

Charlotte, NC · Fire doors

Fire Door Repair in Charlotte

A fire door only works if it closes and latches by itself, every time. When yours does not, or an inspection or fire marshal visit has left you with a deficiency list, we repair fire-rated door assemblies in Charlotte buildings with parts that keep the rating: closers, hinges, latches, fire exit hardware, seals and frames.

Call about fire doors(984) 367-2696

Urgent A fire door that will not close and latch on its own

Signs

What the door is doing, and what that usually means

Fire Door Repair in Charlotte: signs, likely causes and urgency
What you seeWhat it usually meansHow urgent
Door does not close by itselfThe closer is weak, failed or has been removedUrgent
Door closes but does not latchLatch, strike or door alignmentUrgent
Door held open with a wedge or kick-down stopAn unapproved hold-open; it will not close in a fireUrgent
Gaps at the edges or bottom are too largeWorn hinges, a sagging door or a damaged frameToday
Label painted over or missingThe rating can no longer be confirmedThis week
Holes or non-rated hardware in the doorUnlisted changes that may void the ratingThis week

Urgent People are at risk, an exit will not work, or the building cannot be secured. Today The door is failing at its job and every cycle makes it worse. This week Still working, but the wear is visible. Fixing it now costs less than fixing it after it fails.

What gets checked

The inspection

The part named on the call is rarely the only one involved. These are checked on every fire door repair visit in Charlotte:

  • Self-closing The door closes fully from any open position.
  • Positive latching The latch engages every time without help.
  • Clearances Gaps at the head, edges and bottom within the limits for the assembly.
  • Labels Door and frame labels present and readable.
  • Hardware Closers, hinges, latches and exit devices suitable for fire doors.
  • Hold-open devices Only devices that release on alarm; no wedges or kick-downs.
Technician in a white hard hat measuring a glazed door frame with a tape measure and marking it with a red pencil
Measuring before any part is ordered: clearances, hardware locations and the opening itself.

The repair

How fire door repair is done

  1. Work through the deficiency list, or inspect each fire door you name.

  2. Repair closing and latching first; they are the core of the assembly.

  3. Replace non-compliant hardware with listed parts and correct the clearances.

  4. Retest each door and give you a door-by-door record of what was done.

What a fire door inspection looks for

NFPA 80, the standard for fire doors, calls for every fire door assembly to be inspected and tested at least once a year. The inspector checks that the door closes and latches by itself, the gaps are within limits, the labels are readable, there are no unlisted holes or parts, and nothing holds it open except a device that releases on alarm. A door that fails any of these is a deficiency the building owner is expected to fix promptly.

Repairs that keep the rating

A fire door cannot be fixed with any part that happens to fit. Hinges, closers, latches, exit devices and seals all need to be suitable for rated openings, and field changes such as new holes or added plates have limits. A good repair puts the door back the way it was tested, rather than adding something that voids the label.

Straight answers

Repair or replace?

Usually repairable

  • Closers, hinges, latches and seals, with listed parts
  • Clearances corrected by rehanging the door
  • Non-rated hardware swapped for fire-rated hardware

Replacement makes sense

  • Doors whose labels are missing and cannot be re-certified
  • Doors or frames damaged beyond permitted field repair
  • Doors with unlisted holes or alterations that void the rating

Have this ready when you call

  • How many doors, and where they are
  • The inspection or deficiency report, if you have one
  • Any label you can read on the door edge or frame
  • Whether a fire marshal deadline applies
Call about fire doors(984) 367-2696

In Charlotte

Fire doors in Charlotte buildings

In Charlotte, fire door deficiency lists most often come from office towers Uptown and in Ballantyne, apartment buildings in South End and University City, medical buildings and schools. The findings are the same everywhere: stairwell doors that do not latch, corridor doors held open with wedges, and closers removed because a door felt too heavy.

FAQ

Fire Door Repair: common questions

How often do fire doors need to be inspected?

NFPA 80 calls for fire door assemblies to be inspected and tested at least once a year, with records kept. Your fire marshal or insurer may add requirements of their own.

Can you fix the doors on our inspection report?

Yes. Go through the deficiency list on the call. Each door is repaired with listed parts and you get a door-by-door record of the work.

Can a fire door be held open?

Only with a hold-open device that releases automatically on the fire alarm or a detector. Wedges, kick-down stops and furniture are not allowed.

Can I drill a hole in a fire door to add hardware?

Field changes to fire doors are limited. Some small holes for hardware are allowed and others void the rating, so ask before adding anything.

Our fire door label was painted over. Is that a problem?

Yes. If the label cannot be read, the rating cannot be confirmed. Some labels can be cleaned; otherwise the door may need field relabeling through the listing agency, or replacement.

Fire Door Repair in Charlotte

Will not self-close or latch, or failed inspection. Call and describe the door.

Call about fire doors(984) 367-2696
Call (984) 367-2696