Charlotte, NC only · Commercial doors · Phone only, no formsCall (984) 367-2696
Commercial Doors Charlotte: storefront and entrance systems Commercial doors, Charlotte(984) 367-2696

Charlotte, NC · Locks & cylinders

Commercial Door Lock Repair in Charlotte

If your business cannot lock its door at closing time, or the key turns but the bolt does not throw, that needs fixing today. We repair commercial door locks across Charlotte: storefront deadlocks and hookbolts, mortise and cylindrical lever locks, cylinders and strikes, and we rekey after staff changes or a lost key.

Call about locks & cylinders(984) 367-2696

Urgent The building cannot be locked

Signs

What the door is doing, and what that usually means

Commercial Door Lock Repair in Charlotte: signs, likely causes and urgency
What you seeWhat it usually meansHow urgent
Building cannot be lockedThe bolt is not reaching the strike, a broken lock body or a failed cylinderUrgent
Key is hard to turnA worn cylinder, or the door pulling on the boltToday
Lever droops or feels looseA broken return spring in the lockThis week
Bolt only throws if you push or pull the doorThe door has dropped, or the strike is out of lineToday
Lost keys or staff turnoverLocks should be rekeyed so old keys no longer workThis week
Lock damaged in a break-inCylinder pulled or the lock body forcedUrgent

Urgent People are at risk, an exit will not work, or the building cannot be secured. Today The door is failing at its job and every cycle makes it worse. This week Still working, but the wear is visible. Fixing it now costs less than fixing it after it fails.

What gets checked

The inspection

The part named on the call is rarely the only one involved. These are checked on every commercial door lock repair visit in Charlotte:

  • Lock body Mortise, cylindrical or storefront deadlock condition and function.
  • Cylinder Wear, key fit, and whether it is part of a master key system.
  • Strike and bolt How the bolt meets the strike with the door closed normally.
  • Door alignment Whether a dropped door is loading the bolt.
  • Lever trim Springs, sag and the lock function: office, classroom or storeroom.
  • Keys How many keys are out and who holds them.
Technician in a white hard hat measuring a glazed door frame with a tape measure and marking it with a red pencil
Measuring before any part is ordered: clearances, hardware locations and the opening itself.

The repair

How commercial door lock repair is done

  1. Test the lock with the door closed normally, not pushed or pulled.

  2. Fix the door's alignment if it is loading the bolt.

  3. Repair or replace the lock body, cylinder or trim with the right function for the door.

  4. Rekey if needed, then test locking from both sides with every key issued.

A lock is only as good as the door

Most 'broken lock' calls on storefront doors turn out to be a door that has dropped on its pivots. The hookbolt or deadbolt no longer lines up with the strike, so it binds or misses. Replacing the lock without fixing the door means the new lock fails the same way, which is why lock repair here starts with the door.

Rekeying and key control

When an employee leaves with a key, or keys go missing, rekeying the cylinders makes the old keys useless without replacing the locks. Businesses with several doors can be keyed so each person's key opens the doors they need and no others.

Straight answers

Repair or replace?

Usually repairable

  • Cylinders, strikes and latch bolts
  • Lever springs and trim
  • Locks that bind because the door has dropped

Replacement makes sense

  • Lock bodies cracked or forced in a break-in
  • Locks with the wrong function for the door
  • Obsolete storefront locks with no parts

Have this ready when you call

  • Door type: storefront glass, steel or wood
  • Lock type, or a photo of it
  • What happens when you use the key
  • How many keys are out
Call about locks & cylinders(984) 367-2696

In Charlotte

Locks & cylinders in Charlotte buildings

Storefront deadlocks on retail units in South End, Plaza Midwood and along North Tryon get the most calls, followed by office suite locks Uptown and in SouthPark when tenants change. After a break-in anywhere in Charlotte the priority is the same: secure the door tonight, then repair it properly.

FAQ

Commercial Door Lock Repair: common questions

My storefront door will not lock. What is wrong?

Usually the door has dropped so the bolt misses the strike, or the cylinder is worn. Try the lock with the door held exactly closed; if it works then, the door needs rehanging.

What is the difference between rekeying and replacing a lock?

Rekeying changes the cylinder so old keys stop working. Replacing changes the lock itself. Rekeying is enough when the lock still works and you only need new keys.

Can you set up a master key system?

Yes. Several doors can be keyed so each person carries one key that opens only the doors they need.

Can we have a key-locked deadbolt on the inside of our front door?

Only in some buildings and under conditions set by the building code, usually with a sign saying the door stays unlocked while the space is occupied. Ask your code official before fitting one.

Can you repair a lock after a break-in?

Yes. The first job is to make the door secure, then the damaged lock, cylinder, strike or door is repaired.

Commercial Door Lock Repair in Charlotte

Will not lock, key will not turn, or keys are lost. Call and describe the door.

Call about locks & cylinders(984) 367-2696
Call (984) 367-2696