Charlotte, NC only · Commercial doors · Phone only, no formsCall (984) 367-2696
Commercial Doors Charlotte: storefront and entrance systems Commercial doors, Charlotte(984) 367-2696

Charlotte, NC · Overhead & roll-up doors

Commercial Overhead Door Repair in Charlotte

Loading docks and service bays stop when an overhead door does. If a sectional or roll-up door is stuck, crooked, off its track or will not close, we repair it for Charlotte businesses: springs, cables, drums, track, rollers, damaged sections and slats, and the openers that drive them.

Call about overhead & roll-up doors(984) 367-2696

Urgent A loud bang and the door will not lift, or it hangs crooked

Signs

What the door is doing, and what that usually means

Commercial Overhead Door Repair in Charlotte: signs, likely causes and urgency
What you seeWhat it usually meansHow urgent
Loud bang, then the door will not liftA broken torsion springUrgent
Door hangs crooked or a cable is slackA cable off its drum or brokenUrgent
Door off its trackAn impact, worn rollers or a bent trackUrgent
Door reverses or stops partwayOpener sensors, force settings or a binding trackToday
Gap under the door when closedA torn bottom seal or limits out of adjustmentThis week
Rolling door grinds or sticksDry or damaged guides, or bent slatsToday

Urgent People are at risk, an exit will not work, or the building cannot be secured. Today The door is failing at its job and every cycle makes it worse. This week Still working, but the wear is visible. Fixing it now costs less than fixing it after it fails.

What gets checked

The inspection

The part named on the call is rarely the only one involved. These are checked on every commercial overhead door repair visit in Charlotte:

  • Springs Torsion springs on sectional doors and the spring barrel on rolling doors.
  • Cables and drums Cable wear and how the cable seats on the drums.
  • Track and guides Bends, anchors and the gap to the rollers or slats.
  • Sections or curtain Dented sections, bent slats and the bottom bar.
  • Opener Limits, force, safety sensors and the release.
  • Seals Bottom, jamb and header seals.
Row of ten numbered white sectional overhead doors with dock levelers along a grey distribution warehouse
A row of dock doors on a distribution building. When one stops, so does that bay.

The repair

How commercial overhead door repair is done

  1. Make the door safe: lock out the opener and secure the door where it is.

  2. Find what failed and what caused it; a broken spring often has a reason.

  3. Replace springs, cables or rollers, straighten or replace track, and repair sections or slats.

  4. Balance the door, set the opener, and cycle it fully several times.

Why dock and roll-up doors fail

Overhead doors at Charlotte warehouses and distribution buildings can run many times a shift, and springs are rated in cycles, not years. Impacts from trailers and forklifts bend track and sections, and once a door runs out of square everything wears faster. Rolling doors on storage units and service bays suffer when the guides go dry and slats get bent.

Never force a stuck overhead door

A sectional door with a broken spring or cable is heavy and out of balance. Running the opener or lifting it by hand can drop or twist it. Lock out the opener, keep people and vehicles clear, and leave spring and cable work to a technician with the right tools.

Straight answers

Repair or replace?

Usually repairable

  • Springs, cables, drums, rollers and seals
  • Bent track and a few damaged sections or slats
  • Opener limits, sensors and control boards

Replacement makes sense

  • Several sections or much of the curtain damaged
  • A door that keeps breaking springs because it is too heavy for its use
  • Obsolete doors or openers with no parts

Have this ready when you call

  • Sectional or roll-up
  • Approximate size, such as 10 by 10 or 12 by 14 feet
  • Whether it is stuck open, closed or partway
  • Whether anything hit it
Call about overhead & roll-up doors(984) 367-2696

In Charlotte

Overhead & roll-up doors in Charlotte buildings

Overhead doors in Charlotte work hardest at distribution and light-industrial buildings in Steele Creek, along Westinghouse Boulevard, around the airport and up the I-85 and I-77 corridors. Self-storage and auto service buildings along North Tryon, Statesville Avenue, Wilkinson Boulevard and Independence Boulevard run rolling doors all day.

FAQ

Commercial Overhead Door Repair: common questions

Can I open my overhead door with a broken spring?

No. Leave it where it is, unplug or lock out the opener and keep people clear. The door can weigh hundreds of pounds and may drop without warning.

Do you repair roll-up doors as well as sectional doors?

Yes. Rolling steel doors and grilles, and sectional dock and service-bay doors, are all covered.

Why does my overhead door keep coming off its track?

Bent track, worn rollers, loose track brackets or repeated impacts. Putting it back without fixing the cause means it comes off again.

Can one damaged section be replaced?

Often, yes, if replacement sections are still made for the door. Several damaged sections usually mean replacement makes more sense.

Commercial Overhead Door Repair in Charlotte

Stuck, crooked, off track or will not close. Call and describe the door.

Call about overhead & roll-up doors(984) 367-2696
Call (984) 367-2696