Charlotte, NC only · Commercial doors · Phone only, no formsCall (984) 367-2696
Commercial Doors Charlotte: storefront and entrance systems Commercial doors, Charlotte(984) 367-2696

Charlotte, NC · Panic bars

Panic Bar Repair in Charlotte

A panic bar that sticks, a door that will not latch behind you, or an exit device that has to be kicked open is a life-safety problem and a security problem at once. We repair and replace panic bars and exit devices on Charlotte doors: rim, surface vertical rod and concealed vertical rod devices, outside trim, dogging and alarmed exits.

Call about panic bars(984) 367-2696

Urgent Pushing the bar does not release the door

Signs

What the door is doing, and what that usually means

Panic Bar and Exit Device Repair in Charlotte: signs, likely causes and urgency
What you seeWhat it usually meansHow urgent
Push bar is hard to press or sticksA worn latch, a bent rod, or the door binding in its frameUrgent
Door does not release when the bar is pushedA broken internal part or a jammed rod latchUrgent
Door will not latch after closingLatch bolt or strike out of line, or a rod out of adjustmentToday
Outside lever or key does not workThe trim cylinder, lever or the device's outside driveToday
Dogging will not hold the bar downA worn dogging mechanism or a missing dogging keyThis week
Device loose on the doorMounting screws pulled through the door skinToday

Urgent People are at risk, an exit will not work, or the building cannot be secured. Today The door is failing at its job and every cycle makes it worse. This week Still working, but the wear is visible. Fixing it now costs less than fixing it after it fails.

What gets checked

The inspection

The part named on the call is rarely the only one involved. These are checked on every panic bar and exit device repair visit in Charlotte:

  • Release That the door opens with one push from inside, without a key or special effort.
  • Latching That the door latches every time it closes, top and bottom on rod devices.
  • Rods and latches Bent rods, worn top and bottom latches and floor strikes.
  • Trim and cylinder The outside lever, pull or key, and how it unlocks the device.
  • Mounting Through-bolts on hollow metal and glass doors.
  • Fire-rated labeling Fire exit hardware on rated doors, which cannot be swapped for plain panic hardware.
Technician in a white hard hat measuring a glazed door frame with a tape measure and marking it with a red pencil
Measuring before any part is ordered: clearances, hardware locations and the opening itself.

The repair

How panic bar and exit device repair is done

  1. Test release and latching from both sides, and note exactly what fails.

  2. Check the door's hang first, because a dropped door jams latches and rods.

  3. Repair or replace latches, rods, trim and dogging with parts that match the device.

  4. Retest release, latching and locking, including closing on the closer alone.

Why exit devices fail

Panic bars are pushed hard, many times a day, often by people carrying something. Vertical rod devices are the most sensitive: a door that drops slightly or a floor strike packed with grit stops the bottom latch working, and the door either will not latch or will not release. Restaurants, schools and warehouses in Charlotte with heavy back-door traffic see these failures most.

Life safety comes first

An exit door that does not open with a single push from inside is a code problem and a danger. A door that does not latch is a security problem. Both are urgent, and both often trace back to the same cause: a door, rod or latch out of adjustment. Fire-rated doors need fire exit hardware, and dogging (holding the bar down for free entry) is not allowed on it.

Straight answers

Repair or replace?

Usually repairable

  • Latches, rods, dogging and trim cylinders
  • Strikes, mounting and alignment
  • Doors that bind and stop the device working

Replacement makes sense

  • Cracked or obsolete devices with no parts
  • A plain panic bar on a fire-rated door
  • Devices torn out of a damaged door skin

Have this ready when you call

  • Device type, if you know it: rim or vertical rod
  • Whether the door is fire-rated (look for a label on the hinge edge or frame)
  • What it does or does not do
  • Whether the door can be secured tonight
Call about panic bars(984) 367-2696

In Charlotte

Panic bars in Charlotte buildings

Exit devices in Charlotte take the most abuse on restaurant and bar back doors in South End, NoDa and Uptown, on school and church doors across the city, and on warehouse man doors in Steele Creek and along Westinghouse Boulevard. Vertical rod devices on paired doors in office lobbies and stairwells are the most frequent calls.

FAQ

Panic Bar and Exit Device Repair: common questions

Is a stuck panic bar an emergency?

Yes. If an exit door does not open with one push from inside, people may not be able to get out. Keep another exit available and call.

Why does my panic bar door not latch?

Usually the latch or rod is out of adjustment, or the door has dropped so the latch misses the strike. On vertical rod devices, debris in the floor strike is a common cause.

Can you add an alarm to an exit door?

Alarmed exit devices are available for doors that should only be used in an emergency. Mention it on the call and the options for your door will be explained.

Can I lock a panic bar door from the inside?

No. A door with panic hardware must always open from inside with one push. It can be locked against entry from outside, by key or by an access control system.

What is dogging on a panic bar?

Dogging holds the bar down so the door works as a push-pull door during business hours. It is not permitted on fire exit hardware.

Panic Bar and Exit Device Repair in Charlotte

Sticks, will not latch, or will not release. Call and describe the door.

Call about panic bars(984) 367-2696
Call (984) 367-2696