Charlotte, NC only · Commercial doors · Phone only, no formsCall (984) 367-2696
Commercial Doors Charlotte: storefront and entrance systems Commercial doors, Charlotte(984) 367-2696

Charlotte, NC · Automatic doors

Automatic Door Repair in Charlotte

An automatic door that will not open, opens late, stalls halfway or closes on people needs attention the same day, because it is either blocking your entrance or putting someone at risk. We repair automatic sliding and swinging doors for Charlotte businesses: sensors, operators, controllers, belts, tracks, carriers and the door panels they move.

Call about automatic doors(984) 367-2696

Urgent Door closes on someone, or ignores a person in the doorway

Signs

What the door is doing, and what that usually means

Automatic Door Repair in Charlotte: signs, likely causes and urgency
What you seeWhat it usually meansHow urgent
Door closes on people or cartsA safety sensor is out of position, dirty or failedUrgent
Door will not open at allPower, the activation sensor, the controller or a jammed trackUrgent
Opens late, or only for some peopleThe activation sensor's range or angle has shiftedToday
Stalls, jerks or reverses halfwayDebris in the track, worn carrier wheels or a slipping beltToday
Loud grinding or squealingWorn carrier wheels, belt or motor gearboxThis week
Door will not lock at nightThe lock solenoid or the manual lock is out of adjustmentUrgent

Urgent People are at risk, an exit will not work, or the building cannot be secured. Today The door is failing at its job and every cycle makes it worse. This week Still working, but the wear is visible. Fixing it now costs less than fixing it after it fails.

What gets checked

The inspection

The part named on the call is rarely the only one involved. These are checked on every automatic door repair visit in Charlotte:

  • Activation sensors Detection area and timing, so the door opens before people reach it.
  • Safety sensors Presence and threshold sensors that hold the door while someone is in its path.
  • Track and carriers Track condition, carrier wheels and anti-risers on sliding panels.
  • Belt, motor and gearbox Tension, wear and noise under load.
  • Controller and settings Opening speed, closing speed, hold-open time and operating modes.
  • Breakout and locking Emergency breakout panels, the night lock and behavior on power loss.
Technician in a white hard hat and safety glasses holding a yellow spirit level against the aluminum frame of a glass storefront
Checking an aluminum storefront frame for plumb. A door can only hang true in a frame that is square.

The repair

How automatic door repair is done

  1. Watch the door run in every mode and note when it hesitates, reverses or fails to detect someone.

  2. Test the activation and safety sensors and their detection zones before touching the operator.

  3. Clean and repair the drive train: track, carriers, belt and floor guides.

  4. Reset speeds and timing, then walk the door repeatedly to confirm it detects and holds for people.

Why automatic doors in Charlotte stop working properly

Automatic entrances at grocery stores, clinics, hotels and office lobbies run thousands of cycles a week. Charlotte's pollen season and construction dust coat sensor lenses and pack floor guides and tracks, and summer heat is hard on controllers in sun-facing headers. Most failures start small: a door that opens a little late, then one that reverses for no clear reason.

Safety first, then the drive

An automatic door that closes on a person is a safety fault, not an annoyance. The right repair starts with the sensors that detect people, because a door that runs smoothly but does not see someone is worse than a door that does not run. Only then are the track, belt and operator repaired and the speeds set back to a safe range.

Straight answers

Repair or replace?

Usually repairable

  • Sensors, belts, carriers, tracks and guides
  • Controllers and lock solenoids on a current operator
  • Bent panels or broken glass in a sound frame

Replacement makes sense

  • An obsolete operator with no parts available
  • A header and track bent or corroded along their length
  • A door that keeps failing because it is undersized for its traffic

Have this ready when you call

  • Sliding or swinging, single or pair
  • The brand name on the header cover, if visible
  • What it does, and in which mode
  • Whether the entrance is blocked or unsafe right now
Call about automatic doors(984) 367-2696

In Charlotte

Automatic doors in Charlotte buildings

Automatic entrances in Charlotte work hardest at supermarkets and pharmacies, hospital and clinic buildings in Midtown and University City, hotels Uptown, and office lobbies in Ballantyne and SouthPark. Doors facing west or south take the brunt of summer heat in their headers, and spring pollen settles on every sensor lens.

FAQ

Automatic Door Repair: common questions

My automatic door keeps closing on people. What should I do?

Switch it to open or off if it has a mode switch, or lock it open safely, and keep people clear of the panels. Then call. A door that does not detect people is a safety fault and should not keep running.

Can you repair any brand of automatic door?

Most commercial automatic door operators can be repaired with standard sensors, belts and carriers. Tell us the brand on the header when you call so the right parts can be checked.

Why does my sliding door open late?

Usually the activation sensor has been knocked out of aim, or its detection range is set too short. Re-aiming and setting it correctly fixes most cases.

Do automatic doors need regular inspections?

The industry recommends a daily safety check by staff and an annual inspection by a certified inspector. Regular service also catches worn belts and carriers before they stop the door.

The power went out and now the door will not work. Is that a repair?

Sometimes it is only a reset or a tripped breaker. If the controller or battery backup failed in the outage, it needs repair. Call and describe what the door does now.

Automatic Door Repair in Charlotte

Will not open, stalls or closes on people. Call and describe the door.

Call about automatic doors(984) 367-2696
Call (984) 367-2696