Charlotte, NC · Steel doors
Hollow Metal Door Repair in Charlotte
Steel back doors, stairwell doors and warehouse man doors take impacts, weather and forced entry. When one rusts at the bottom, sags, will not latch or is bent from a hit, we repair or replace hollow metal doors and frames for Charlotte businesses, along with the hinges and hardware they carry.
Call about steel doors(984) 367-2696Urgent An exterior steel door that cannot be closed and locked
Signs
What the door is doing, and what that usually means
| What you see | What it usually means | How urgent |
|---|---|---|
| Door will not close or latch | Sagging hinges, a bent door or a twisted frame | Today |
| Rust at the bottom of the door or frame | Standing water at the threshold; the steel is thinning | This week |
| Dent or bend from an impact | A cart, pallet jack, forklift or forced entry | This week |
| Frame loose in the wall | Failed anchors or cracked masonry | Today |
| Door forced in a break-in | A bent edge, a damaged frame stop or a destroyed lock area | Urgent |
Urgent People are at risk, an exit will not work, or the building cannot be secured. Today The door is failing at its job and every cycle makes it worse. This week Still working, but the wear is visible. Fixing it now costs less than fixing it after it fails.
What gets checked
The inspection
The part named on the call is rarely the only one involved. These are checked on every hollow metal door repair visit in Charlotte:
- Frame Plumb, anchors, the stop and corrosion at the floor.
- Door Flatness, edge damage and rust at the bottom edge.
- Hinges Wear, screws and reinforcement.
- Hardware Lock, exit device and closer mounting on the steel skin.
- Fire label Whether the door and frame carry a rating that the repair must keep.
- Weather seals Perimeter seal, door bottom and threshold on exterior doors.

The repair
How hollow metal door repair is done
Check that the frame is still plumb and anchored before working on the door.
Repair or replace the hinges and straighten or replace damaged parts.
Treat light rust, or fit a new door when the bottom has rusted through.
Rehang the door and refit the hardware, then test latching, locking and the seal.
What wears out a steel door
Hollow metal doors are tough, but they are not maintenance-free. The bottom of an exterior door sits in water every time it rains, and rust starts inside the door where nobody sees it. Heavy doors also wear their hinges, and once one hinge goes the door drops and drags. Impacts from pallet jacks, carts and forced entry bend edges and frame stops.
Keep the frame, replace the door
The frame is set into the wall and is the expensive part to replace. A good hollow metal repair keeps the frame wherever possible: re-anchor it, straighten the stop, treat corrosion at the floor. A door that is rusted through or badly bent is often better replaced, and new doors are prepared to match the existing frame and hardware.
Straight answers
Repair or replace?
Usually repairable
- Hinges, closers and hardware
- Frames that need re-anchoring or straightening
- Minor dents and edge damage
Replacement makes sense
- Doors rusted through at the bottom
- Doors bent so they no longer close flat
- Frames corroded through at the floor
Have this ready when you call
- Interior or exterior
- Approximate size, such as 3 by 7 feet
- Whether there is a label on the door edge or frame
- What happened: rust, impact or a break-in
In Charlotte
Steel doors in Charlotte buildings
Steel doors in Charlotte wear hardest behind restaurants and shops in South End and Uptown, on warehouses in Steele Creek and along Westinghouse Boulevard and North Graham Street, and on apartment and office stairwells across the city. Humid summers speed up rust on exterior doors that have lost their paint at the bottom edge.
FAQ
Hollow Metal Door Repair: common questions
Can a rusted steel door be repaired?
Light surface rust can be treated and painted. If the bottom of the door has rusted through, a new door fitted to the existing frame is usually the better repair.
Do I need to replace the frame too?
Usually not. Frames can often be re-anchored, straightened and kept, which avoids cutting into the wall.
My steel door was forced in a break-in. What now?
The first job is to make the opening secure. Then the frame, door and lock are assessed; a bent door or damaged frame stop often needs replacing.
Why does my steel back door not latch?
Most often worn hinges let the door sag, or the frame has shifted. Fixing the hang usually fixes the latch.
Related
Related services
Hollow Metal Door Repair in Charlotte
Dented, rusted, sagging or will not latch. Call and describe the door.