Charlotte, NC · Door closers
Commercial Door Closer Repair in Charlotte
A door that slams, will not latch, swings shut too fast or leaks oil from the closer body has a closer that is out of adjustment or failing. We repair and replace commercial door closers in Charlotte: surface-mounted arms, concealed overhead closers in storefront headers and floor closers under glass doors.
Call about door closers(984) 367-2696Urgent An exterior or fire door that will not close and latch
Signs
What the door is doing, and what that usually means
| What you see | What it usually means | How urgent |
|---|---|---|
| Door slams shut | Closing or latch speed set too fast, or the closer has lost fluid | Today |
| Door will not close or latch on its own | The closer is too weak or out of adjustment, or the door is binding | Today |
| Oil on the closer body or the floor | Failed seals; the closer cannot be adjusted back | This week |
| Door blows open in the wind | Backcheck not set, or a broken arm | Today |
| Arm bent or hanging loose | Impact, or the door forced past its stop | Urgent |
| Fire door does not close fully | Closer too weak or a hold-open fault, so the door is not protecting the opening | Urgent |
Urgent People are at risk, an exit will not work, or the building cannot be secured. Today The door is failing at its job and every cycle makes it worse. This week Still working, but the wear is visible. Fixing it now costs less than fixing it after it fails.
What gets checked
The inspection
The part named on the call is rarely the only one involved. These are checked on every commercial door closer repair visit in Charlotte:
- Closer body Leaks, cracks and whether the valves still control the speed.
- Arm and shoe Bent arms, loose shoes and stripped mounting screws.
- Speeds Closing speed, latch speed and backcheck, set as separate adjustments.
- Door hang Hinges or pivots that make the closer fight a sagging door.
- Latch and strike Whether the latch catches cleanly at the end of the swing.
- Hold-open Hold-open arms and holders. Fire doors may only be held open by devices that release on alarm.

The repair
How commercial door closer repair is done
Check that the door swings freely by hand with the closer arm disconnected.
Repair the hang if the door is binding, then reconnect the closer.
Set closing speed, latch speed and backcheck separately, in small steps.
Replace a leaking closer with one sized for the door and its use, and retest latching.
Why closers fail in Charlotte buildings
A closer controls a heavy door with hydraulic fluid, and that fluid thins as it warms. A closer set on a cool morning in March can slam by July, especially on a sun-facing entrance. Wind is the other problem: Charlotte's summer storms catch doors with no backcheck and wrench the arm past its stop, bending it or tearing the mounting out of the frame.
Adjust, or replace
A closer that is dry and sound can be adjusted. A closer leaking oil has failed seals, and adjusting it only buys a few days, so it needs replacing. Concealed closers in storefront headers and floor closers under glass doors take more work to reach, but they follow the same rule.
Straight answers
Repair or replace?
Usually repairable
- Speed, latch and backcheck adjustment
- Arms, shoes and mounting
- Doors that bind or sag and overwork the closer
Replacement makes sense
- Any closer that is leaking oil
- Closers too small for the door weight or the wind exposure
- Floor closers that no longer hold the door centered
Have this ready when you call
- Where the closer is: on top, hidden in the header, or in the floor
- Interior, exterior or fire door
- What it does: slams, will not latch, leaks
- The brand on the closer body, if you can see it
In Charlotte
Door closers in Charlotte buildings
Wind-exposed entrances on Uptown plazas and corner storefronts in South End and NoDa go through closers fastest. Stairwell and corridor fire doors in Ballantyne and University City office buildings need closers that latch every time, and restaurant back doors along Central Avenue and in Plaza Midwood often have arms bent from propping the door open.
FAQ
Commercial Door Closer Repair: common questions
Can a slamming door closer be adjusted?
Usually, if it is not leaking. Closing speed and latch speed are set with separate valves. If the closer is leaking oil, adjustment will not last and it should be replaced.
Why does my door closer leak oil?
Its internal seals have failed. Once a closer leaks it loses control of the door and cannot be adjusted back. Replacement is the fix.
Why does my door not latch after it closes?
The latch speed is set too slow, the closer is too weak, or the door is binding on its hinges or frame. Binding has to be fixed first or a new closer will be overworked.
Can I prop a fire door open?
No. A fire door must be able to close and latch by itself. If it needs to stand open, use a hold-open device that releases automatically on the fire alarm.
Do you repair floor closers on glass doors?
Yes. Floor closers under storefront and all-glass doors are repaired or replaced, along with the top pivot they work with.
Related
Related services
Commercial Door Closer Repair in Charlotte
Slams, will not latch, or leaks oil. Call and describe the door.